AOD-200

WIRELESS DUAL TECHNOLOGY OUTDOOR MOTION DETECTOR 
The AOD–200 is a wireless dual technology outdoor motion detector
which can perform perfectly both when installed on the outside of the
protected building, as well as indoors, in spaces with harsh or specific
environments (e.g. in halls, under umbrella roofs). The AOD–200
detector incorporates PIR and MW technologies. The dual
technology, combined with the algorithm of detector auto–adaptation
to environmental conditions, ensures high immunity to false alarms
and, consequently, stable operation in adverse weather conditions,
such as rain, snow, sunshine and strong gusts of air. The device
offers correct operation within a wide temperature range from –35°C
to +55°C, with automatic compensation of ambient
temperature changes. 
The AOD–200 detector is characterized by a detection angle as wide
as 100 degrees and a range of more than 15 meters. The look down
zone is protected, so any intruder's attempt to creep up in order to
damage or tear the device off will be detected. In addition, the
AOD–200 detector series software has been designed so as to
prevent triggering false alarms by the movement of small pets. The
AOD–200 detector is provided with a dusk sensor which enables it to
be used also in alarm systems with home automation, without having
to install any twilight detectors. The detector can also interface with
the KNX system via a control panel of the INTEGRA series. Thus, the
AOD–200 functionality allows you to easily and conveniently control,
for example, the roller shutters, exterior lighting of the building, garage
door or entrance gate, and also select the moment of operation
through fine sensitivity adjustment. A very convenient feature is
configuration of the detector sensitivity from the DLOADX 
program level. 
The AOD–200 detector is designed for mounting directly on a flat
surface. If the detector is to be turned vertically or tilted horizontally,
you can use special angle–type or ball–joint type brackets from the BRACKET C set (white) or BRACKET C GY set (gray). 
The AOD–200 detector is available in two color versions: white (AOD–200) and gray (AOD–200 GY). 
two detection circuits: PIR + MW 
built–in dusk sensor to enable the detector to be used in automation systemsremote sensitivity configuration for detection circuits and dusk sensor from DLOADX levelsplash–proof polycarbonate enclosure, IP54 ratedcan operate in adverse weather conditions (rain, snow, fog, strong wind)
tamper protection against opening and tear–offdigital temperature compensation for correct detector operation in –35°C to +55°C temperature rangehigh immunity to false alarms owing to the auto–adaptation algorithm usedlook–down zone protectionpet immunity option (up to 20 kg)
low power consumptioncan be mounted directly on flat surface or by means of dedicated brackets included in BRACKET C set: 
o angle type bracket: 45° fixed angle
o ball–joint type bracket: adjustable through 60° vertically and 90° horizontally 
Attention! 
Cooperation with AOD–200 requires: 
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only. www.satel.eu

 قیمت : تماس

• < قبلی
• بعدی >